Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

Background biomonitoring of residue levels of 137 pesticides in the blood plasma of the general population in Beijing

Due to the widespread use of pesticides, human exposure to pesticides is possible and can potentially cause adverse impacts on public health. We measured 137 pesticides including organophosphorus, organochlorine, pyrethroid and carbamate pesticides together with various herbicides in 100 human blood samples collected from the general population in Beijing. The samples were analysed by triple quadrupole tandem gas chromatography-mass spectrometry. In total, 24 organochlorine pesticides, 5 pyrethroid pesticides and 6 organophosphorus pesticides were detected. The detection rates of HCB, α-HCH, β-HCH, γ-HCH, p,p′-DDE and quintozene were 99, 96, 74, 72, 96 and 95%, respectively. No statistically significant gender difference in the blood concentrations of the pesticides was found. Consistent with the trend of the increasing β-HCH, p,p′-DDE and quintozene concentrations with age, a strong positive correlation between the age and concentrations of β-BHC, p,p′-DDE and quintozene was observed.     

Spatial distribution characteristics of soil organic carbon in subtropical forests of mountain Lushan,China

The study on the spatial distribution of forest soil organic carbon (SOC) is of great significance for accurate assessment of carbon storage in forest ecosystems. In the present study, by taking eight kinds of forest soils of Mountain Lushan in the subtropical area as the research object, we studied the spatial distribution characteristics of SOC in this mountainous area. The results showed that the SOC content and SOC density (SOCD) of main forest types in the Mountain Lushan were lower than the national and the world average. The soil layer of Lushan forest was thinner, and the SOC and active SOC (ASOC) contents of different forest types and SOCDs are the highest in the surface soil. SOCD of the topsoil accounts for 32.64–54.03% of the total SOCD in the whole soil profile. Surface litter is an important source of SOC, and the different vegetation types are the important reason for the different spatial distribution of SOC in this area. Soil SOC contents in the high-altitude forest (bamboo forest, deciduous broadleaf forest, Pinus taiwanensis forest, evergreen-deciduous forest, and coniferous-broadleaved mixed forest) were higher than those in the low-altitude forest (evergreen broadleaf forest, shrub, and Pinus massoniana forest). However, the difference in SOC content exhibited at the altitude gradient is significantly lower than that in SOC in the soil profile. This indicates that both soil depth and elevation are the important factors that affected SOC distribution. However, the influence of soil depth on spatial distribution of SOC may be more complex than that of altitude. Vegetation types and soil properties are the main reasons for the large differences of reduction rate in the contents of SOC and ASOC.     

Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

Journal of Material Cycles and Waste Management - The traditional Chinese medicinal plant Magnolia officinalis has a wide range of applications; including more than 200 kinds of patented Chinese...     

电厂屏式过热器弯头开裂原因失效分析

通过外观检查、硬度、金相等检测方法,从金属管壁超温运行、蒸汽侧氧化行为、析出相及冷弯变形对组织性能影响等方面分析了某电厂1 000 MW超超临界机组屏式过热器弯头开裂原因,得出TP347HFG弯头开裂的主要原因是弯头组织富含较多的σ相、NbC等硬脆析出相,同时冷弯加工导致管子内部产生残余应力,加剧了弯头脆性开裂的倾向。     

Evaluation of ecotourism development in rural regions of China

The current status of ecotourism in rural China was analyzed in this paper.Empirical surveys covering the whole country indicate that ecotourism in rural China has attracted a large number of tourists who,however,didn’t generate revenues that can match the number.Although the environmental quality of those rural ecotourism destinations is high with little negative impacts,several problems have already appeared,suggesting a need to monitor those areas.The current practice of interpretation in most rural ecotourism destinations did not provide environmental education opportunities to the tourists.And local communities need more effective ways to decide on the prospects of local ecotourism development by themselves.Finally,a few recommendations for improving the sustainability of ecotourism destinations were provided.     

江苏省2014-2016年臭氧污染区域特征分析

分析2014—2016年江苏省O₃污染状况，以及苏北、苏中和苏南3个典型区域O₃年度、季度、日变化和频度占比等分布特征。结果表明，江苏省的O₃空间分布呈现北低南高，2014—2016年的O₃超标占比由18.4%上升至34.9%；2016年苏北、苏中和苏南地区O₃-8h第90百分位数与2014年相比，上升2.7%，21.8%和3.3%；3个区域夏季O₃-8h均值最高，春、秋2季次之，冬季最低；O₃-1h日变化呈单峰状态，最低值出现在06:00—07:00，最高值出现在15:00—16:00；2016年3个地区的O₃频度占比均呈正态分布，主要集中在40~80 μg/m³，所占比例均>15%；苏中和苏南区域2016和2014年相比O₃频率占比的变化幅度较大，苏北地区变化幅度不大。指出，江苏省的O₃污染程度在逐年提高，污染范围从苏南逐渐往中部和北部城市扩大。     

利用毒代动力学模型研究氟虫腈在夹杂带丝蚓体内的手性选择性积累过程

农药的生物积累直接影响其毒性,但是手性农药在生物体内的选择性积累过程仍不明确.本文在恒定环境水浓度的条件下,开展手性农药氟虫腈的外消旋体及其对映体在底栖无脊椎动物夹杂带丝蚓体内的生物积累实验.在96 h和72 h的吸收和消除实验过程中,测定生物体内的氟虫腈的外消旋体和对映体浓度随时间的变化情况,构建毒代动力学模型,获取吸收和消除速率常数.结果表明夹杂带丝蚓对R-氟虫腈的生物浓缩因子(1981 L·kg~(-1)脂肪)比对S-氟虫腈(1748 L·kg~(-1)脂肪)更大.R-氟虫腈和S-氟虫腈的吸收速率常数相当,分别为311±11 L·kg~(-1)脂肪·h~(-1)和313±13 L·kg~(-1)脂肪·h~(-1),而R-氟虫腈的消除速率常数小于S-氟虫腈,分别为0.157±0.006 h~(-1)和0.179±0.008 h~(-1),因此相对较慢的消除是导致R-氟虫腈在夹杂带丝蚓体内更高生物积累的主要原因.研究说明毒代动力学参数可有效阐释手性外源物质在生物体内选择性积累的差异.     

电化学开关表面活性剂对芘的可逆增溶作用

表面活性剂增强修复技术(SER)是目前行之有效的有机污染土壤修复技术,但SER技术存在表面活性剂与污染物分离困难、易导致二次污染、成本高等问题.基于此,提出采用具有电化学开关特性的表面活性剂(N,N-二甲基二茂铁甲基十二烷基溴化铵,Fc12)代替SER技术中的常规表面活性剂,发展基于开关表面活性剂的可逆增强修复技术(RSER).选取芘作为目标物,研究了Fc12在氧化和还原态对芘的增溶作用以及常见环境因素,如pH和温度对Fc12可逆增溶的影响.结果表明,相对于氧化态Fc12,还原态Fc12在其临界胶束浓度(CMC)以上时对芘表现出显著的增溶作用,且增溶能力随表面活性剂浓度增大而增强.温度对Fc12的增溶作用影响显著,例如,还原态Fc12在浓度为3 mmol·L~(-1)、25℃条件下时,芘的表观溶解度为0.779 mg·L~(-1),当温度增加到40℃时,芘的表观溶解度为0.971 mg·L~(-1),其表观溶解度增加了24.6%;但氧化态条件下,芘的表观溶解度仅增加了6.5%;芘的解吸率(芘在还原和氧化态Fc12的表观溶解度差值与还原态Fc12增溶芘的比值)由63.67%增加到71.27%.pH也显著影响Fc12的增溶,当pH值在6—10范围变化时,还原态Fc12的增溶作用呈现先增加后减小的趋势,且在pH 9附近增溶能力最强,而pH 8时芘的解吸果最好.     

典型有机磷酸酯阻燃剂分析方法研究进展

有机磷酸酯(OPEs)是一类重要的有机磷阻燃剂,近些年逐渐取代了溴代阻燃剂,广泛应用于各行各业,也因此导致在多种环境介质中有较高的暴露量和潜在风险。已有研究表明,OPEs具有一定的毒理效应,对人体及其他生物均有潜在危害。本文综述了近年来国内外OPEs的检测技术,详述了不同环境介质OPEs的前处理方法。结果表明,目前固相萃取(SPE)和固相微萃取(SPME)仍是水样前处理的主要方法;对于固体样品,加速溶剂萃取/加压液相萃取(ASE/PLE)和微波辅助萃取(MAE)应用较多;虽然大气样品仍以固体吸附剂方式为主,但已向在线一体化方向发展;而生物样品的前处理方法多与水样和固体样品方法相似;但是对于复杂环境介质中OPEs样品的前处理较为困难,方法有待改善;气相色谱-质谱联用(GC-MS)和气相色谱-氮磷检测器(GC-NPD)对弱极性和易挥发的OPEs分析效果好,而强极性和难挥发的OPEs多用液相色谱-质谱联用(LCMS);气相色谱-质谱串联(GC-MS/MS)、液相色谱-质谱串联(LC-MS/MS)和高效液相色谱-质谱串联(UPLC-MS/MS)等对多种复杂的环境介质中的OPEs均有较好的检测分析效果,但并未普及。最后,对OPEs分析测试方法的发展趋势提出了展望。